Kit Checklist
Please Log In for full access to the web site.
Note that this link will take you to an external site (https://shimmer.mit.edu) to authenticate, and then you will be redirected back to this page.
- 2x4 (or longer) lego plate, Quantity: 3
- 2x4 lego bricks, Quantity: 7
- 2x8 lego brick, Quantity: 1
- 5V power supply, Quantity: 2
- MicroUSB to USB (or USB-C), Quantity: 2
- Solderless breadboard, Quantity: 1
- Large lego plate, Quantity: 1
- Twist tie, Quantity: 1
- Replacement blades, Quantity: 2
- Chopstick, Quantity: 2
- Angle sensor in bracket, Quantity: 1
- Angle sensor to chopstick connector, Quantity: 1
- Chopstick to lego plate connector, Quantity: 2
- Propeller to chopstick E-shaped connector, Quantity: 4
- 8" female-to-male jumpers (set of 2), Quantity: 2 (4 total wires)
- Bolt, Quantity: 1
- Lego plate with hole, Quantity: 1
- Hall effect sensor in housing, Quantity: 2
- 8" female-to-male jumpers (set of 3), Quantity: 2 (6 total wires)
- Coated cube magnet, Quantity: 1
- Coated disk magnet, Quantity: 1
- Machine screw, Quantity: 1
- "Silver" short jumper, Quantity: 1
- Orange jumper wire, Quantity: 5
- Yellow jumper wire, Quantity: 2
- Green jumper wire, Quantity: 3
- Gray jumper wire, Quantity: 1
- 4" male-to-male jumpers with pins, Quantity: 3
- MPC6002, Quantity: 2
- 47 uF cap, Quantity: 3
- 10 uF cap, Quantity: 4
- 2.2 uF cap, Quantity: 2
- 1 uF cap, Quantity: 2
- 220k res (red-red-yellow-gold), Quantity: 2
- 100k res (brown-black-yellow-gold), Quantity: 4
- 47k res (yellow-purple-orange-gold), Quantity: 2
- 10k res (brown-black-orange-gold), Quantity: 8
- 1.1k res (brown-brown-red-gold), Quantity: 2
- 100 res (brown-black-brown-gold), Quantity: 4
